Percentage reading
Insulation status display with a simplified OK / FAIL mode.

INSTRUMENTS / ELECTRICAL ISOLATION
Identify insulation faults in pipeline dielectric and monolithic joints without disconnecting cathodic protection. ISOTEST-RF uses radio frequency technology for straightforward field testing.
Technical advice and after-sales support directly from SELEC.
ONE MEASUREMENT, A CLEAR ANSWER
ISOTEST-RF tests the electrical isolation of pipeline dielectric and monolithic joints and identifies partial or complete short circuits, including short-circuited studs or bolts.
It applies a radio frequency signal and analyses its response to assess insulation. Designed for inspection and maintenance of cathodic protection systems.
DESIGNED FOR FIELD WORK
Insulation status display with a simplified OK / FAIL mode.
A compact instrument to carry alongside your survey equipment.
Up to 1,600 measurements per charge, as specified in the datasheet.
Automatic start-up calibration
Automatic instrument calibration at every start-up.
Visual and audible indicators
OLED display, LEDs and audible measurement feedback.
Probe error detection
Identifies connection problems during use.
INSTRUMENT DATA
Download the datasheet for specifications and included accessories.
Download datasheet (PDF) ↓| Detection range | 0–100% (5% resolution) |
|---|---|
| Display | 1.3-inch OLED |
| Dimensions | 120 × 90 × 40 mm |
| Weight | 260 g |
| Operating temperature | −20 °C to +55 °C |
| Protection rating | IP54 |
| Housing material | ABS |
| Battery | Li-ion 18650 · 1,500 mAh |
| Charging | USB · 5 V / 1 A |
| Automatic shut-off | After 7 minutes |

WHAT'S INCLUDED
Optional instrument verification accessory. Checks instrument operation before taking measurements. Available separately.
Contact SELEC for supply and delivery details for your order.
BEFORE YOU CHOOSE
No. Radio frequency testing checks insulation without disconnecting the cathodic protection system or applying high voltages.
A megohmmeter is not suitable for this test on installed pipelines. Parallel electrical paths through the soil can affect resistance readings and prevent the joint's insulation from being assessed independently. ISOTEST-RF uses radio frequency technology to test dielectric and monolithic joints under these conditions, without disconnecting cathodic protection.
An optional verification accessory checks ISOTEST-RF operation before measurements begin. It is ordered separately and is not included in the standard supply.